Suncenter CO2/oxygen/nitrogen Gas Booster Pump

Product Detail

Suncenter CO2/oxygen/nitrogen gas booster pump

Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series 

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include: 

·Compressed Air driven - no electricity required (connect to normal air compressor)

·In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

·No airline lubricator required 

·Hydrocarbon free - separation between air and gas sections 

·Pressures to 80Mpa (11,600 psi)  

·Wide range of models with different ratios

·Built-in-cooling on most models 

·Easy to install, operate and maintain

·Best price / performance ratio 

·No heat, flame or spark risk and explosion proof 

·Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

·Applicable gas: Argon/Helium/Hydrogen/Oxygen/NO2/CH4/LNG/LPG/CNG/FM200 etc.







Applications 

·Pressure test with gas

·Gas transfer and filling

(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)

·Charging of gas cylinder and accumulator with nitrogen

·Supply for isolating gas systems

·Gas assisted injection molding

·Transfer of oxygen cylinders

·Charging of breathing air bottles

·Leak test 

·Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components

·Safety valve adjusting 



DGA series gas booster pumps(Single acting, single air drive head): 

DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel. 



Technical spcification

Model	Pressure  boost ratio	Min. gas Inlet  pressure PA (bar)	Max.gas Inlet  pressure PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGA02	2:1	1.0	16	16	3-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGA05	5:1	1.5	40	40	3-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGA06	6:1	2.0	48	48	3-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGA10	10:1	3.5	80	80	3-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGA25	25:1	7.0	200	200	3-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGA40	40:1	10	320	320	3-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGA60	60:1	20	480	480	3-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGA100	100:1	25	800	800	3-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar




DGD series gas booster pumps(Double acting ):

DGD series pumps are double acting, single stage with double air driven heads type.   

·DGD pumps are available with high quality seals, which provide significantly better service life

·Double pump heads with exhaust cooling devices. 

·All components in contact with the gas are made of stainless steel. 

·Pipes mounting way are available as customized. 



Technical specification


Model	Pressure  boost ratio	Min. gas Inlet  pressure PA (bar)	Max.gas Inlet  pressure  PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGD10	10:1	3.5	80	80	3-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGD25	25:1	10	200	200	3-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGD40	40:1	15	320	320	3-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGD60	60:1	25	480	480	3-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGD100	100:1	35	800	800	3-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGD130	130:1	50	1040	1040	3-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 ba




DGT series gas booster pumps(Double acting, double stage, single air drive head ):




DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure. 

·DGT pumps are available with high quality seals, which provide significantly better service life 

·Double pump heads with exhaust cooling devices. 

·All parts in contact with the gas are made of stainless steel.



Technical specification


Model	Pressure  boost ratio	Min. gas Inlet  pressure  PA (bar)	Max.gas Inlet  pressure PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGT25	25:1	1	10	200	3-8 bar	25XPL+3.5XPA	3/8/ 1/4	136(at PA of 8 bar )
DGT40	40:1	1	10	320	3-8 bar	40XPL+ 6XPA	3/8/ 1/4	124(at PA of 8 bar )
DGT10/60	10:1/60:1	1	10	480	3-8 bar	60XPL+6X PA	3/8/ 1/4	84(at PA of 8 bar )
DGT25/60	25:1/60:1	10	25	480	3-8 bar	60XPL+2.5XPA	3/8/ 1/4	80(at PA of 15 bar )
DGT100	100:1	1	10	800	3-8 bar	100XPL+10XPA	3/8/ M14*1.5	63(at PA of 8 bar )

Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar

Should the gas booster pumps caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.






 

 

Suncenter Fluid Control Equipment Co., Ltd is the memeber company of Suncenter Group,which is located in Dongguan city of Guangdong province in China.With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality,competitive price as well as excellent after-sales service, we have win a great reputation in the field.

 

Our main products including:

High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)

High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)

High Pressure Test Equipment(Hydraulic Pressure Test Machine, Burst/Hydrostatic test machine, Safety Valve Test Bench,Impulse Testing Machine, etc.)

 

 


If you are interested in any of our products, please feel free to contact us, we could also make the customized products according to your special requirements.