Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2 Gas Booster For Cylinder Filling

Product Detail

Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2 gas booster for gas cylinder transfer and filling

Here below you can see the working video of the gas booster for helium gas cylinder transfer 

https://cloud.video.taobao.com/play/u/1849429550/p/2/e/6/t/1/50053176936.mp4
















Pneumatic (Air compressor driven) gas booster pump system






Suncenter - Pneumatic gas booster system are compact and delicacy solution tailored to customer specific requirements with gas booster pumps as well as all accessories to be fitted and installed in the frame or a closed cabinet. 

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. 

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. 

Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor). 

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option. 




Applications

·Pressure test with gas

·Gas transfer and filling

(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)

·Charging of gas cylinder and accumulator with nitrogen

·Supply for isolating gas systems

·Gas assisted injection molding

·Transfer of oxygen cylinders

·Charging of breathing air bottles

·Leak test 

·Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components

·Safety valve adjusting




Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System






DGS booster system = booster pump+ following valves, gages, and parts







The hottest selling- model A and model C cabinet picture







The standard gas booster pumps system including following parts:

Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)

Stainless steel (carbon steel) material cabinet (Three models for choosing)

F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

Driven air switch (Pump starting switch), driven air pressure gauge

Gas inlet switch, Gas inlet pressure gauge

Gas outlet switch, Gas outlet pressure gauge,  unloading valve, interconnecting pipes etc.

And we could also customize it according to clients’ special requirement.




Technical specification for DGS-DGA series




Model	Pressure  boost ratio	Min. gas Inlet  pressure PA (bar)	Max.gas Inlet  pressure PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2:1	1.0	16	16	3-8 bar	2XPL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5:1	1.5	40	40	3-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10:1	3.5	80	80	3-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25:1	7.0	200	200	3-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40:1	10	320	320	3-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60:1	20	480	480	3-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100:1	25	800	800	3-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130:1	35	800	1040	3-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar




Technical specification for DGS-DGD series


Model	Pressure  boost ratio	Min. gas Inlet  pressure  PA (bar)	Max.gas Inlet  pressure PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	3-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	3-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	3-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	3-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	3-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar


Technical specification for DGS-DGT series


Model	Pressure  boost ratio	Min. gas Inlet  pressure  PA (bar)	Max.gas Inlet  pressure PA (bar)	Max. gas outlet pressure  PB (bar)	Driven air pressure  PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	1	10	200	3-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	1	10	320	3-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	1	10	480	3-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	3-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	1	10	800	3-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )




Note:  P_L: driven air pressure   P_A: gas inlet pressure   P_B: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar

Should the gas booster system caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.